clay bar

If your vehicle is covered by a light mist of paint over spray, you can remove it by paw using the dirt bar method. You demand to allow two to four hours to make clean a car and more time to clean a larger vehicle such as a four door pickup truck, RV, SUV, etc..

The required supplies are: a clay bar and lubricant, which can exist purchased from auto parts stores and motorcar supply sections in section stores, few soft towels, a spray bottle, and liquid wax, and a pigment brush.

The overspray removal process is as follows:
1. Wash your vehicle to remove every bit much dirt and droppings equally possible.
two. Fill the spray bottle with water or the lubricant that came with the purchased clay bar. The lubricant or plain water will work the aforementioned.
three. Spray a two square foot surface area with the lubricant and spray the clay bar.
4. Take the moisture dirt bar and move it in straight motions back and along over the wet two foot square section. The dirt bar should erase away the overspray.
five. Wipe off the wet residue with one of the soft towels and feel the cleaned surface. If the surface feels like glass and no overspray is visible, echo the process on the next over sprayed section. Keep the clay bar away from whatever porous and textured surfaces as the clay will embed itself into those surfaces such as the moldings and trim.
6. After half of the vehicle has been cleaned, fold the bar into itself to provide a fresh cleaning surface with which to use against the next over sprayed surface. Any smoothen surface on a vehicle, such as the glass and plastic, tin be cleaned using the clay bar.
7. After the balance from the clay disallowment process has been removed, the vehicle is now set up to wax.
8. Paste wax, liquid wax, or a sealant should be used to protect the vehicle'south cleaned surfaces. A sealant will provide the best protection against the elements. The easiest protective application is the use of liquid wax; however, its longevity is far less than a sealant or a paste wax awarding. Be conscientious to keep the wax away from any vehicle prophylactic, molding or trim parts, as they may become discolored. Apply the protective blanket to a ii human foot foursquare and wipe it off inside a couple of minutes then overlap the process on the adjacent two pes square area.
ix. After the wax or the protective coating has been wiped off using a soft dry towel, accept the paint brush and brush the wax or sealant from all the crevices and cracks where the wax or sealant is visible. If the wax or sealant has become embedded into a porous surface, squeeze the dry pigment brush bristles together and brush the residuum from the affected surfaces. Do not use any solvent on these vehicle parts as they will become discolored or faded.

Please identify the following link in your browser to see this procedure in activeness: http://www.youtube.com/embed/fqW1nzgyMNA .

If your vehicle is ane of many vehicles covered by the overspray please contact united states with information equally to who is responsible for the overspray and we may be able to clean your vehicle and nib the entity responsible for the overspray on your vehicle.